·  The continuous analysis system is based on NDIR(One Way Non Dispersive Infrared Bank)

·  Model SWG200-1 is installed at the gas sampling point , thus reducing the response time of the analyser. The standard gas sampling line is 10m.

·  The analyzer also includes a complete sample conditioning system.

·  Model SWG200-1 has a standard digital data interface as well as analogue outputs (0/4-20 mA). Measured data is available in these outputs.

·  The front panal incorporates a screen to show all measured and maintenance data.

·  The device has been designed for continuous measurement. Therefore, a zero calibration is automatically carried out once a day, according to the software configuration chosen by the user.

·  The 230V / 50Hz power line, gas sampling line, condensation output and data lines are installed in inputs in the lower part of the housing.

·  The device must be installed in a dry, weatherproof location and an ambient temperature between +5°C and +45°C.